Shower Base Riser: SBR100
- Extension legs for shower base unit of SB1
- SBR100 / SBR100-R legs come with the unit. Longer 150 and 200 are accessories.
- The "R" Order Code has a thumb-screw to tighten the legs into the base, while the standard leg has a push-in clip.
- The R Order Code has superseded the original and can be used on all SB1 chairs.
- Extension legs can also be used to extend the caster wheel height tube of SB1
- Ideal when the shower has a high step, or the tray is sunk down below floor
- Easy swap out with existing shower base legs
Refer to BathCheck to find out if you need a SBR accessory.
Enquiries: admin@shower-buddy.com
Watch the: Tutorial Video
Learn how to fit Shower Base Risers (SBR) showing "push in clip'. Not shown is the later "R" order code legs using a thumb screw to tighten the leg, rather than push in clip
Shower Base Risers: Details
If the shower floor is level with (or lower) than the bathroom floor, or you have a high step at the shower entry, the shower base unit may need extra height to allow the base, bridge and rolling base (chair) to align correctly.
This is no longer a problem with our powder-coated Shower Base Risers – a 4x set of longer tubular leg parts that replace the SB1 Showerbuddy’s standard shower base legs. This accessory provides more height to clear the shower step and connect chair and showerbase units.
You may need SBR100 (100mm of 4” long) or SBR150 (150mm or 6” long) or SBR200 (200mm or 8” long) to replace the standard showerbase legs which are 63mm (2.5”). You may also need a workshop technician to swap out the caster wheel tubular lags for a set of SBR above the caster wheel.
Our bathroom measuring wizard, BathCheck, will help you determine these requirements.
Shower Base Risers can be ordered with the Showerbuddy SB1, or purchased later.