500-270 Safety Restraints

(Model SB1, SB2, SB2T and SB3T come complete with chest and lap restraints as standard issue). SB6 series chairs come with one safety restraint. This set comes ex factory fitted as a chest belt but can easily be relocated to a waist setting. An additional set can fitted as an accessory.

Petite Buddy P1 Armrests To Reduce Seat Width

This accessory changes the dimension between standard armrests from 475mm (18.7”) to 295mm (11.6”) by removing the standard adult chair armrests and fitting this accessory. NOTE: These A-P1 armrests are removable but CANNOT fold away.

Petite Buddy P2 Armrests To Reduce Seat Width

This accessory changes the dimension between standard armrests from 475mm (18.7”) to 400mm (15.7”) by removing the standard adult chair armrests and fitting this accessory. NOTE: These A-P2 armrests are removable but CANNOT fold away.

Custom
Size Bridge

With transfer chairs sometimes the length of the bridge, connecting the mobile wheeled base to the bath or shower base unit, needs to be modified to suit the particular bathroom design or available space. Standard bridges can be shortened or lengthened up to 900mm (35.5”). 

NRA
Neck Rest Assembly

Sometimes a user may require a neck rest on a non-tilting transfer chair. Showerbuddy models SB1 and SB2 include provision for this and an accessory neck rest can easily be fitted after purchase. Neck rests are adjustable in height and forward / backward to suit most users.

P1- Paediatric Converter

Pediatric Converters P1 allows the chair to be sized to suit a smaller user yet retain the ability to grow with the user saving on expensive chair upgrade costs over time. With a padded backrest cushion that adjusts for seat depth and limited recline, reduced width between armrests.

P2- Paediatric Converter

Pediatric Converters P2 allows the chair to be sized to suit a smaller user yet retain the ability to grow with the user, saving on expensive chair upgrade costs over time. With a padded backrest cushion that adjusts for seat depth and limited recline, reduced width between armrests,

PBC Padded
Foam Backrest Cushion

For users requiring a padded backrest cushion. This cushion is 40mm (1.6”) thick and provides comfort as well as reducing the seat depth. Requires screw fixing to pre-drilled fixing locations in the chair push handle uprights, with all parts supplied.

RBE24 Rolling
Base Chair Riser

When a bathtub is sitting higher than the bathroom floor it may not be possible to align the rolling base (chair) with the bathtub base unit to connect the bridge. In these instances you will need to extend the height of the chair by using the accessory RBE24.

SBR - Shower Base Risers

When the base, or floor of the shower is sitting lower than the bathroom floor it may not be possible to align the rolling base with the shower base unit to connect the bridge. You will need to extend the height of the shower base by using the SBR. 

SCCF - Seat Cushion Closed Front

A closed front commode cushion.

Compatible with SB6C SB6W

SCLO - Seat Cushion
Left Hand Opening

A Left Hand side opening commode cushion.

Compatible with SB6C SB6W

SCO
Seat Cushion
Overlay

The SCO overlay is a full sized PU Foam cushion overlay that closes off the commode opening allowing the chair to be used as a transport chair.

`

`

`

`

SCOC Seat Cushion Overlay SB6 chair only

To close the commode function and use the chair as a transport chair if required. Compatible with SB6

`

`

`

`

`

SCP1 Cushion With 150mm (6″) Commode Opening

An open front cushion with a smaller commode opening for smaller users. This cushion is also thicker than standard cushions. Commode opening dimensions:
Opening width at front 76mm (3”), centre of opening from front 203mm (8”), commode opening width 150mm (6”).

SCP2 Cushion With 170mm (6.7″) Commode Opening

An open front cushion with a smaller commode opening for smaller users. This cushion is also thicker than standard cushions. Commode opening dimensions: Opening width at front 89mm (3.5”), centre of opening from front 203mm (8”),  commode opening width 170mm (6.7”).

SCRO – Seat Cushion
Right Hand Opening

A Right Hand side opening commode cushion. Compatible with SB6C SB6W

`

`

`

`

TBE24 – Rolling Base
Chair Extension

When a bathtub is sitting higher than the bathroom floor it may not be possible to align the rolling base (chair) with the bathtub base unit to connect the bridge. In these instances you will need to extend the height of the bath base by using the accessory TBE24.

Compatible with SB2, SB2T

TBR 22/26
Tensioned Backrest

The tensioned backrest has 3 separate adjustment points to suit most users’ posture and comfort. The fabric is a fast drying comfortable mesh fabric.
Order 22″ or 26″.  Compatible with SB6C22 SB6C26

TBR
Tensioned Backrest

The tensioned backrest has 3 separate adjustment points to suit most users’ posture and comfort. The fabric is a fast drying comfortable mesh fabric.

Compatible with SB1 SB2 SB2T SB3T SB6C SB6W

HY5 Walker
Carry Bag

Optional Bag accessory for the all in one mobility system for home or travel.

`

`

`

`

HY5 Walker
Additional Wheels

Additional 75mm PVC wheels for your HY5 Walker Optional set of wheels accessory for the all in one mobility system for home or travel. The HY5 Walker already comes with a set of wheels.

HY5 Walker
Safety Belt

Optional Seat Belt accessory for the all in one mobility system for home or travel.

 

For all enquires please fill in the form to contact admin